Location

Estimating and Design Services in Texas

Texas has a 2015 IECC statewide baseline that Austin, Dallas, Houston and San Antonio have already moved past, so the city on the permit matters more than the statute. Houston adds Chapter 19 floodplain rules that decide how high condensers, generators and switchgear sit, and Dallas adds its own trade chapters. Statewide the load is cooling plus dehumidification rather than heating. Typical fee is $300 to $2,500 by trade count and project size. Estimates are billed at $30-$45 per hour.

Texas prices on a 2015 IECC statewide baseline that most large cities have already exceeded, so the local amendment set and the floodplain rules matter as much as the state code.

Construction project in Texas
24-48 Hour Turnaround

Estimating and Design Around Texas's Codes and Climate

Texas is the largest single estimating market we serve, and it punishes anyone who applies one set of assumptions across it. The state baseline is the 2015 IECC, but Austin, Dallas, Houston, and San Antonio all run more current local editions, so a project permitted inside one of those cities is not a state-code project. Houston adds Chapter 19 floodplain rules that decide how high your condensers, generators, and switchgear have to sit. Dallas adds its own trade code chapters. And across the whole state the dominant load is cooling plus dehumidification rather than heating, which changes equipment selection more than any single line item. We assign every Texas estimate to the correct city, code edition, and flood zone before a number is applied.

What Makes Texas Different

Energy Code

Texas enforces the 2015 IECC as its statewide commercial baseline. Austin, Dallas, Houston, and San Antonio adopt more current editions locally, so the local amendment set governs inside those cities.

Climate & Load Profile

Hot-humid, cooling-dominant across most of the state, IECC Zones 2A and 3A. West Texas moves drier, and the Gulf Coast adds salt exposure to the wind and flood requirements.

Prevailing Wage

No state prevailing wage law. State and locally funded work is priced on open-market regional rates; federally funded projects carry the Davis-Bacon wage determination for the county.

Common Project Types

Data centers, oil and gas and petrochemical support, large commercial and office, medical centers, manufacturing, and warehouse and distribution.

Cities We Serve in Texas

Dallas-Fort Worth (DFW)HoustonAustinSan AntonioEl Paso

Texas Codes We Estimate Against

Texas code compliance is layered: a statewide baseline plus a city-level edition plus overlay rules like Houston's floodplain chapter. All three have to be confirmed before pricing.

Code / StandardHow Texas applies itWhere it hits the estimate
Energy code2015 IECC statewide baseline. Austin, Dallas, Houston, and San Antonio adopt more current editions with local amendmentsEnvelope values, economizer thresholds, duct insulation, lighting power density, dehumidification controls
Houston Code of Ordinances Chapter 19Floodplain regulations governing minimum elevation of equipment and structuresElevated condensers, generators, switchgear and fire pumps, flood-rated equipment, vault and penetration details
Dallas City Code Chapters 53-56Local trade code chapters for building, electrical, plumbing, and mechanical scopePermit-set scope, inspection requirements, and trade-specific amendments
IBC / IMC / IPC / IFCAdopted locally with amendments on top of the state baselineEgress and occupancy, ventilation rates, gas piping, sprinkler and alarm scope
NFPA 70 (NEC)Adopted locally with Texas amendmentsService and feeder sizing, surge protection, emergency circuits, EV readiness
ASCE 7 wind and floodGulf Coast wind speeds plus flood hazard areas in Harris and surrounding countiesRooftop equipment anchorage, enclosure ratings, generator and gear elevation

Code editions and local amendments change. Confirm the edition in force at permit submittal, and the flood zone, before pricing a bid.

Regional Markets We Estimate Across Texas

Texas is effectively several construction markets sharing one legislature. Labor pools, code editions, and dominant project types differ enough that each estimate is assigned its own basis.

MarketWhat drives constructionDominant MEP scopeEstimating nuance
Dallas-Fort WorthData centers, corporate relocation, distribution, multifamilyHigh-density power, process cooling, VRF and chilled water, fire protectionPriced by capacity on data center work; office and multifamily priced on a local labor basis
Houston / Harris CountyPetrochemical and energy, Texas Medical Center, port and industrialProcess cooling, industrial ventilation, medical gas, flood-elevated equipmentChapter 19 elevation strategy priced as a line item, plus corrosion allowances near the ship channel
Austin / Central TexasTechnology, semiconductor and advanced manufacturing, higher educationCleanroom and process support, high-density power, chilled water plants, lab exhaustThe most current local energy code in the state, so equipment efficiency assumptions rise
San Antonio / South TexasMilitary and defense, healthcare, manufacturing, hospitalityHigh-volume DX cooling, plumbing and medical gas, backup generationFederal and defense work can carry Davis-Bacon wage determinations by county
El Paso and West TexasBorder manufacturing, logistics, mining, solarEvaporative and DX hybrid cooling, industrial power distribution, solar balance-of-systemDrier climate than the rest of the state, and long material haul distances raise freight

Regional labor, code editions, and flood exposure vary widely within Texas. These are the five markets where most of our Texas volume sits.

What Changes Between Texas Cities

Same state, four different permit desks. The city you pull the permit in decides which code edition, which amendments, and which inspection quirks you are pricing against.

CityWhat the city addsWhat it costs you
DallasOwn trade chapters for building, electrical, plumbing and mechanical, plus a separate green code for city-owned workMore plan review rounds than the suburbs, and mechanical scope that has to match the Dallas chapter language rather than the IMC default
Fort Worth and the mid-citiesFort Worth follows the state baseline more closely, but each suburb runs its own permit office and fee scheduleA project spanning three suburbs can mean three submittal sets. We price it as one estimate but flag the review split
HoustonChapter 19 floodplain rules on top of the state code, plus a building code that has moved ahead of the state in placesEquipment elevation is a real line item, not a note. Condensers, generators, switchgear and fire pumps get platforms, flood ratings or both
AustinThe most current energy code in the state, plus aggressive review on envelope and lightingHigher efficiency baselines and tighter lighting power density, which shifts the mechanical and electrical numbers before labor is even applied
San AntonioState baseline plus its own amendments, with a large volume of federal and military workDavis-Bacon wage determinations show up often here. Same drawings, different labor rate than a private job across town
El PasoState baseline, drier climate than the rest of Texas, long haul from most suppliersEvaporative and hybrid cooling shows up far more often, and freight runs higher because everything comes in from the east

City amendments change more often than the state baseline. We confirm the edition in force on the submittal date, not the date the drawings were stamped.

What a Texas MEP Estimate Costs

Our fees are set by construction value and trade count, not by state. Texas does not carry a premium or a discount. These are the ranges we quote most often on Texas work.

Project construction valueOur estimating feeWhat pushes it toward the top of the range
Under $500K$300 to $1,200Small tenant improvement with full MEP scope. Freight and minimum material orders eat a bigger share of the job
$500K to $2M$1,000 to $2,500Two to four trades, a real spec book, and a city review that will actually check the numbers
$2M to $10M$2,000 to $5,000Data center or industrial work, Houston flood elevation, or federal funding that brings Davis-Bacon into play
$10M and up$4,000 to $12,000+Multiple buildings on one site, several AHJs, phasing, and long-lead equipment that has to be quoted rather than priced from a database

Fee ranges, not construction cost. Construction cost depends on the drawings, the city, and the week the bid goes out. We do not publish a Texas square-foot price because it would be wrong for most projects.

24-48 Hour Turnaround on standard Texas estimate requests.

Estimating Services by Trade

Texas trade estimates price hot-humid cooling and dehumidification loads, large-load electrical distribution, and flood-elevation requirements alongside the local energy code edition.

Texas-Specific Estimating Services

Texas Estimating and Design Questions

Which energy code applies to Texas commercial projects?

Texas enforces the 2015 IECC as its statewide commercial baseline and has not adopted a newer statewide edition. Austin, Dallas, Houston, and San Antonio each adopt more current editions with local amendments, so a project permitted inside those cities is not priced to the state baseline. We confirm both the state baseline and the local amendment set.

How does Houston Chapter 19 affect MEP estimates?

Houston's floodplain regulations are in Chapter 19 of the City of Houston Code of Ordinances and govern how low equipment can sit relative to flood elevation. That means condensers, generators, switchgear, and fire pumps are elevated on platforms or specified as flood-rated, and penetrations and vaults are treated differently. We price the elevation strategy as a line item.

What drives MEP cost most in Texas?

Cooling capacity and electrical service size, not heating. Hot-humid conditions mean high sensible loads plus significant latent load, so dehumidification strategy matters more than heating efficiency. On the electrical side, data center and industrial growth has stretched ERCOT interconnection timelines, which can drive schedule and temporary power cost more than material pricing.

Does Texas have a prevailing wage law?

No. Texas has no state prevailing wage statute, and state and locally funded projects are not subject to Davis-Bacon. Federally funded or assisted projects are subject to Davis-Bacon and are priced against the wage determination for the project county. Some public owners add local wage requirements by contract, so the labor basis is confirmed on every estimate.

What do you need to deliver a Texas estimate in 24-48 hours?

Send the full set (A, S, MEP), the spec book, and the address. The address sets the local energy code edition, the flood zone, and the labor market, and in Houston the flood zone alone can move real money. Deliverable is marked-up drawings, PDF, and Excel quantities by division.

Get Your Texas Estimate

Submit your plans and receive a detailed, line-item estimate, with most standard requests in 24-48 hours, confirmed with your quote.