Multifamily MEP Estimating
Multifamily MEP estimating covers per-unit systems, common area equipment, domestic hot water, and fire suppression for developers and contractors building apartments and condominiums. Most estimates are delivered in 24-48 hours, with pricing typically $300-$2,500 depending on unit count. Estimates are billed at $30-$45 per hour.
Per-unit counts, common area systems, domestic hot water, and per-unit fire suppression, estimated unit by unit.
Multifamily MEP estimating depends on getting the unit-count math right, and that's a harder problem than it sounds once a building has more than one unit type. We take off each unique unit floor plan in full detail, electrical devices, plumbing fixtures, HVAC equipment and ductwork, fire suppression heads, then apply accurate unit counts per floor and per unit type rather than averaging across the whole building. A 200-unit project with four distinct unit plans needs four separate per-unit takeoffs multiplied by the correct count of each, not one blended average applied to all 200 units, since a studio and a three-bedroom unit carry meaningfully different fixture counts, electrical device counts, and HVAC equipment sizing.
Common areas get estimated as their own distinct scope, not folded into a per-unit average. Corridors, lobbies, amenity spaces, fitness centers, parking garages, and back-of-house areas each carry mechanical, electrical, and plumbing requirements that don't scale with unit count the way in-unit scope does, a building's corridor lighting and life safety systems are sized against corridor length and egress requirements, not the number of units along that corridor. We take these off separately so the final estimate clearly separates in-unit cost, which scales with unit count and mix, from common area cost, which scales with building footprint and amenity program.
Domestic hot water and fire suppression both require a design-specific approach rather than a standard assumption. Central domestic hot water plants serving the whole building are priced as a single system with distribution risers to each unit, while individual in-unit water heaters are counted and priced per unit, and the right approach depends entirely on which system the mechanical design actually specifies. Fire suppression is estimated per unit rather than per floor, since sprinkler head counts and layout often vary between unit types even on the same floor, and a per-floor average would misprice buildings with mixed unit layouts. The finished estimate ties unit-type takeoffs, accurate unit counts, and common area scope together into one coordinated report.
What Makes This Industry Unique
- Unit count and unit-type mix drive the entire estimate's accuracy
- Common area scope must be separated from in-unit scope, not averaged together
- Central vs. individual domestic hot water systems are priced completely differently
- Fire suppression is estimated per unit, since layouts vary even within the same floor
- Corridor and life safety systems scale with building footprint, not unit count
Key MEP Systems for This Building Type
- Per-unit-type electrical, plumbing, and HVAC takeoffs multiplied by accurate unit counts
- Common area mechanical, electrical, and plumbing scope (corridors, lobbies, amenities)
- Central or individual domestic hot water system sizing and distribution
- Per-unit residential fire suppression heads, pipe, and hangers
- Parking garage ventilation, lighting, and life safety systems
24-48 Hour Turnaround on standard requests.
Trade Estimates for This Building Type
Common Questions
How do you estimate per-unit MEP scope across a large multifamily building?
We take off a representative unit type (or each unique unit type in a mixed-plan building) in full detail, then multiply by accurate unit counts per floor, while separately taking off common areas, corridors, lobbies, amenity spaces, as their own distinct scope rather than folding them into a per-unit average.
Is domestic hot water estimated per unit or for the whole building?
It depends on the system design. Central domestic hot water plants serving the whole building are sized and priced as one system with distribution risers to each unit, while individual unit water heaters are counted and priced per unit, and we confirm which approach the mechanical design uses before pricing either way.
Do you estimate fire suppression per unit or per floor?
Per unit. Residential sprinkler heads, pipe, and hangers are counted unit by unit against the sprinkler layout, since unit floor plans and head placement often vary even within the same building, and a per-floor average misses that variation.
Multifamily MEP Estimating Guides
Ready to Get Started?
Submit your multifamily unit plans and common area drawings for a detailed MEP estimate.