Industrial & Warehouse MEP Estimating
Industrial and warehouse MEP estimating covers high-bay lighting, industrial HVAC, compressed air, and high-amperage power for developers and contractors building distribution and manufacturing facilities. Most estimates are delivered in 24-48 hours, with pricing typically $300-$2,500 depending on facility size. Estimates are billed at $30-$45 per hour.
High-bay lighting, industrial HVAC, compressed air, and high-amperage power, sized to the actual facility and equipment load.
Industrial and warehouse MEP estimating is driven almost entirely by two variables that vary more widely in this building type than any other: ceiling height and connected equipment load. High-bay lighting is the clearest example. Fixture spacing and lumen output scale directly with mounting height, a 40-foot clear-height distribution warehouse needs a different fixture wattage, beam angle, and spacing pattern than a 24-foot manufacturing building, and both need something different again from a cross-dock facility with lower clearance near the dock doors. We take off high-bay fixtures against the actual racking layout and aisle configuration, since lighting designed around a generic warehouse template routinely under-lights narrow aisle racking or over-lights wide-open staging areas.
Industrial HVAC splits into two very different problems depending on whether the space is conditioned warehouse storage or a process-driven manufacturing environment. Pure storage warehouses often need only basic heating and ventilation, sometimes just enough to keep the space above freezing and manage humidity, while manufacturing floors frequently carry process heat loads, exhaust requirements for specific operations, and make-up air needs that have nothing to do with occupant comfort and everything to do with the equipment running on the floor. We size mechanical systems against the actual use case rather than a blanket industrial HVAC assumption, since treating a climate-controlled manufacturing clean assembly area the same as bulk pallet storage misses real cost in both directions.
Compressed air and electrical service are where industrial estimates diverge most sharply from standard commercial work. Compressed air piping, compressors, dryers, and drop locations are taken off as their own system whenever production or assembly equipment requires it, sized to the connected equipment's actual air demand rather than applied as a generic allowance. Electrical service often needs to be sized well above typical commercial amperage to support production equipment, conveyor systems, and material handling machinery, so we size switchgear, panels, and feeders directly against the facility's connected equipment load schedule rather than a square-footage-based electrical allowance that works for office or retail but badly understates demand on a true manufacturing floor.
What Makes This Industry Unique
- High-bay lighting spacing and output scale directly with ceiling clear height
- Storage warehouses and process manufacturing floors have very different HVAC needs
- Compressed air systems are sized to connected production equipment, not a generic allowance
- Electrical service often exceeds typical commercial amperage for manufacturing equipment
- Racking and aisle layout directly affects lighting fixture placement and count
Key MEP Systems for This Building Type
- High-bay LED lighting sized to mounting height and racking layout
- Industrial HVAC: basic warehouse conditioning vs. process-driven manufacturing systems
- Compressed air piping, compressors, and dryers sized to equipment demand
- High-amperage electrical service, switchgear, and feeders for production equipment
- Dock door, loading area, and material handling electrical and mechanical scope
24-48 Hour Turnaround on standard requests.
Trade Estimates for This Building Type
Common Questions
How do you estimate high-bay lighting for warehouses?
We count high-bay fixtures by mounting height and output, since fixture spacing and lumen output scale with ceiling height, a 40-foot clear-height distribution warehouse needs materially different fixture spacing and wattage than a 24-foot manufacturing building, and we price fixtures and controls against the specific racking and aisle layout.
Is compressed air piping included in an industrial MEP estimate?
Yes. Compressed air piping, compressors, dryers, and drop locations are taken off as their own system when the facility includes production or assembly equipment that requires it, sized to the connected equipment's air demand rather than treated as a generic plumbing allowance.
Do you price high-amperage electrical service for manufacturing equipment?
Yes. Manufacturing and distribution facilities often require electrical service and gear sized well above typical commercial amperage to support production equipment, conveyor systems, and material handling machinery, and we size switchgear, panels, and feeders against the actual connected equipment load schedule.
Industrial and Warehouse Estimating Guides
Ready to Get Started?
Submit your industrial or warehouse drawings and equipment schedule for a detailed MEP estimate.