Part of Electrical Systems EstimatingElectrical

Low Voltage Estimating Services

Low voltage estimating covers data/comm cabling, security, AV, and fire alarm systems, built for low voltage contractors and integrators bidding specialty scope. Takeoffs are typically delivered in 24-48 hours, with pricing based on device count and system complexity. Estimates are billed at $30-$45 per hour.

Data/comm, security, AV, and fire alarm takeoffs, scoped and counted system by system.

Low voltage scope rarely comes from a single drawing set, and that's exactly why it gets underestimated so often. Structured cabling, security, audiovisual, and fire alarm systems are typically designed by different consultants, bid to different subcontractors, and documented on different sheets, even though they often share the same cable tray, conduit, and backbox infrastructure. We estimate each system on its own, starting with data and communications cabling: cable footage by category (Cat 6, Cat 6A, fiber), drop counts and outlet locations, patch panel and rack requirements in the telecom room, and cable tray or J-hook pathway footage, all cross-referenced against the IT and telecom drawings rather than inferred from the electrical plan alone.

Security and access control get the same system-specific treatment. We count card readers, door contacts, request-to-exit devices, and electrified hardware tied to the access control schedule, and take off CCTV camera counts by type (fixed, PTZ, panoramic) along with the associated cabling and head-end equipment. AV scope, display mounts, speakers, microphones, control panels, and the low-voltage wiring connecting them, is quantified against the AV system drawings and equipment schedule, since AV packages vary enormously between a basic conference room and a multi-zone auditorium or broadcast space, and a generic per-square-foot allowance misses that variation entirely.

Fire alarm takeoff follows the life safety design closely. We count initiating devices, smoke detectors, heat detectors, and pull stations, and notification appliances, horn/strobes and speakers, directly from the fire alarm riser diagram and device matrix, then take off the circuit wiring connecting them back to the fire alarm control panel. Because fire alarm systems are life-safety-critical, we check device counts against the matrix rather than the floor plan symbols alone, since matrices are the document of record when the two don't agree. Every system, cabling, security, AV, and fire alarm, is delivered as its own line-item schedule so each can be priced independently or combined into a single low-voltage package depending on how your project is bid.

Every Deliverable, Itemized

  • Data/comm cable footage by category (Cat 6, Cat 6A, fiber) and drop/outlet counts
  • Patch panel, rack, and telecom room equipment requirements
  • Security device counts: card readers, door contacts, CCTV cameras by type
  • AV equipment and wiring takeoff against the AV system drawings
  • Fire alarm initiating and notification device counts from the device matrix
  • Cable tray and J-hook pathway footage shared across low-voltage systems

Most Standard Estimates in 24-48 Hours: exact timeline confirmed with your quote.

Common Questions

Do you estimate structured cabling separately from security and AV?

Yes. Structured cabling (data/comm), security (access control and CCTV), AV, and fire alarm are each scoped and priced as separate systems, since they're typically bid to different low-voltage subcontractors even when they share pathway and conduit infrastructure.

What's included in a data/comm cabling takeoff?

We take off cable footage by category (Cat 6, Cat 6A, fiber), drop counts and outlet locations, patch panel and rack requirements, and cable tray or J-hook pathway footage, cross-referenced against the telecom and IT drawings.

Do you estimate fire alarm devices and wiring?

Yes. We count initiating devices (smoke detectors, pull stations, heat detectors), notification appliances (horns, strobes, speakers), and take off fire alarm circuit wiring, checked against the fire alarm riser diagram and matrix for consistency with the life safety design.

Ready to Get Started?

Submit your low-voltage drawings for a system-by-system estimate across cabling, security, AV, and fire alarm.