Estimating and Design Services in Florida
Florida bids are working through two code editions at the same time. Permits issued up to December 30, 2026 sit on the 8th Edition; anything submitted from December 31 lands on the 9th. We price to whichever edition will govern the actual permit date, and in Miami-Dade and Broward that price also carries HVHZ product approval, anchorage and equipment-location rules that do not apply in Orlando. Typical fee runs $300 to $2,500 depending on trade count and project size. Estimates are billed at $30-$45 per hour.
Florida estimates follow the 8th Edition Florida Building Code through December 30, 2026, with the 9th Edition taking over on December 31, and HVHZ rules changing equipment selection in Miami-Dade and Broward.

Estimating and Design Around Florida's Codes and Climate
Florida is mid-transition. The 8th Edition (2023) Florida Building Code governs permits today, but the 9th Edition (2026) takes effect on December 31, 2026, and a bid submitted this month can land on either side of that line depending on when the permit is actually pulled. Underneath the edition question sits a climate that makes latent load, not sensible load, the design driver: outdoor dew points stay high for most of the year, so ventilation air carries moisture a standard cooling coil will not remove at part load. And in Miami-Dade and Broward, the High-Velocity Hurricane Zone imposes tested-and-labeled equipment, heavier anchorage, and restricted equipment locations that do not apply in Orlando. We confirm the edition, the wind zone, and the flood exposure before applying a single unit price.
What Makes Florida Different
Energy Code
The 8th Edition (2023) Florida Building Code is in force through December 30, 2026. The 9th Edition (2026) takes effect December 31, 2026, and applies to permit applications submitted on or after that date.
Climate & Load Profile
Hot-humid subtropical, IECC Zones 1A and 2A. Latent load dominates design, and hurricane wind and flood exposure govern equipment placement statewide.
Prevailing Wage
No state prevailing wage law; the state law was repealed in 1979 and local wage mandates are further restricted. Federally funded projects follow Davis-Bacon.
Common Project Types
Hospitality and resort, healthcare, multifamily and condominium, retail centers, education, and hurricane-rated commercial and industrial buildings.
Cities We Serve in Florida
Florida Codes We Estimate Against
Florida is running two editions inside the same bid window. Getting the effective date wrong changes the wind provisions, the mechanical requirements, and the product approval documentation.
| Code / Standard | Governing edition in Florida | Where it hits the estimate |
|---|---|---|
| Florida Building Code, Building | 8th Edition (2023) in force through Dec 30, 2026. 9th Edition (2026) effective Dec 31, 2026 | Permit-set scope, occupancy and egress, equipment locations, anchorage requirements |
| Florida Building Code, Energy Conservation | 8th Edition (2023) in force; 9th Edition applies to permits from Dec 31, 2026 | Envelope values, duct insulation and testing, lighting power density, economizer and controls scope |
| Florida Building Code, Mechanical | 8th Edition (2023), with the 9th Edition following in the same transition | Ventilation and dehumidification, refrigerant piping, equipment access, condensate management |
| HVHZ requirements, Miami-Dade and Broward | High-Velocity Hurricane Zone provisions layered on top of the statewide code | Tested and labeled rooftop equipment, heavier curb and anchorage schedules, restricted equipment locations |
| ASCE 7 wind and flood | Wind-borne debris regions plus flood hazard areas statewide | Equipment anchorage, enclosure ratings, generator and switchgear elevation above flood level |
| NFPA 70 (NEC) | Adopted through the Florida Building Code with state amendments | Service sizing, surge protection, emergency circuits, generator and transfer switch scope |
Florida's 9th Edition takes effect December 31, 2026. Confirm which edition governs the actual permit date before pricing a bid.
Regional Markets We Estimate Across Florida
Wind zone, flood exposure, and labor pools differ sharply between South Florida and the rest of the state. Each estimate is assigned to the correct basis rather than a statewide average.
| Market | What drives construction | Dominant MEP scope | Estimating nuance |
|---|---|---|---|
| Miami-Dade and Broward | International finance, hospitality, condominium towers, transit-oriented development | HVHZ-rated rooftop equipment, chilled water and VRF, high-rise plumbing, fire alarm networks | Tested and labeled product approval plus heavier anchorage make equipment selection a cost decision |
| Orlando / Central Florida | Theme parks and hospitality, distribution, healthcare, rapid population growth | High-volume DX and chilled water, dedicated outdoor air, kitchen exhaust, fire protection | High latent load with heavy ventilation fractions, so dehumidification scope is a major line item |
| Tampa Bay | Healthcare, financial services, multifamily, port and industrial | Chilled water plants, medical gas, high-rise plumbing, flood-elevated equipment | Flood elevation and storm surge exposure affect equipment placement across the bay area |
| Jacksonville / Northeast Florida | Logistics and distribution, financial services, naval and industrial | Warehouse MEP shells, process cooling, high-bay HVAC, backup generation | Lower wind exposure than South Florida but larger temperature swings, so heating appears in the plant |
| Space Coast and Treasure Coast | Aerospace and defense, manufacturing, coastal residential | Precision environment HVAC, process cooling, backup power, marine-grade equipment | Defense work can carry Davis-Bacon wage determinations alongside coastal corrosion requirements |
Regional labor, wind zone, and flood exposure vary widely within Florida. These are the five markets where most of our Florida volume sits.
What Changes Between Florida Markets
The state code is the same everywhere. What changes is the wind zone, the flood map, the inspections desk and how much of the review is done by the county instead of the city.
| Market | What the jurisdiction adds | Where it shows up in the price |
|---|---|---|
| Miami-Dade | HVHZ product approval, Miami-Dade NOA requirements, and its own testing and inspection regime | Every rooftop unit needs a valid NOA, and the curb, anchorage and penetration details are heavier than the state code. Equipment that is fine in Tampa is not approvable here |
| Broward | HVHZ under the same provisions, with county-level review and its own e-permitting quirks | Same product approval path as Miami-Dade. Plan review runs through the county, so resubmittals cost calendar time as well as money |
| Orlando and Central Florida | Statewide code, no HVHZ, but very high ventilation loads from hospitality and assembly occupancy | Latent load and outdoor air dominate the mechanical number. Kitchen exhaust, make-up air and dehumidification are usually the biggest single line |
| Tampa and Pinellas | Statewide code plus coastal flood zones and storm surge mapping | Elevated pads, flood-rated gear and generator placement. A building two blocks inland can price differently from one on the water |
| Jacksonville and Northeast Florida | Statewide code, lower wind exposure, more temperature swing than South Florida | Heating actually shows up in the plant. Warehouse shells and high-bay heating are common scope here and rare in Miami |
| Space Coast | Statewide code, coastal exposure, heavy federal and defense presence | Davis-Bacon wage determinations on federally funded work, plus corrosion and wind requirements on the same project |
Flood zone and HVHZ boundary are set by address. Two sites in the same city can carry different equipment requirements.
What a Florida MEP Estimate Costs
Fees follow construction value and trade count, not geography. A Miami high-rise and an Orlando retail shell at the same value cost the same to estimate.
| Project construction value | Our estimating fee | What pushes it toward the top of the range |
|---|---|---|
| Under $500K | $300 to $1,200 | HVHZ product approval research on a small job. One rooftop unit can still need an NOA and a wind-load calculation |
| $500K to $2M | $1,000 to $2,500 | Four trades, a real spec book, and a jurisdiction that reviews mechanical and electrical separately |
| $2M to $10M | $2,000 to $5,000 | High-rise plumbing, chilled water plants, or a code transition review across both editions |
| $10M and up | $4,000 to $12,000+ | Multiple buildings, several AHJs, phased permits, and long-lead chillers or generators that have to be quoted rather than priced |
Fee ranges, not construction cost. Florida construction pricing moves with the storm season and the insurance market, so we price the drawings, not a square-foot average.
24-48 Hour Turnaround on standard Florida estimate requests.
Estimating Services by Trade
Florida trade estimates price the Florida Building Code scope, whether that is an HVHZ-rated Miami project, an Orlando hospitality build, or a Tampa healthcare fit-out.
Florida Estimating and Design Questions
Which Florida Building Code edition applies in 2026?
The 8th Edition (2023) is in force and applies to permits issued through December 30, 2026. The 9th Edition (2026) takes effect December 31, 2026, and applies to permit applications submitted on or after that date. We price to the edition that will govern the actual permit date and flag where the two editions diverge on wind and mechanical provisions.
What is the HVHZ and how does it change MEP costs?
The High-Velocity Hurricane Zone covers Miami-Dade and Broward Counties and imposes requirements well beyond the statewide code: tested and labeled equipment for wind-borne debris regions, heavier curb and anchorage schedules for rooftop units, restricted equipment locations, and stricter product approval documentation. A unit acceptable in Orlando may not be approvable in Miami.
How is dehumidification handled in Florida estimates?
Latent load is the design driver. Outdoor dew points stay high for most of the year, and ventilation air brings in moisture a standard cooling coil will not remove at part load. We price dedicated outdoor air systems, enthalpy recovery, reheat, and humidity control as explicit scope rather than assuming the cooling system handles it incidentally.
Does Florida have a prevailing wage law?
No. Florida repealed its state prevailing wage law in 1979 and has not replaced it, and state legislation has further restricted local governments from setting their own wage requirements on public works. Federally funded or assisted projects are still subject to Davis-Bacon and are priced against the wage determination for the project county.
What do you need to deliver a Florida estimate in 24-48 hours?
Drawings (A, S and MEP), the spec book, and the address are enough to start. In Florida the address decides HVHZ status, which wind zone applies, and whether flood elevation controls where equipment can sit. Output is marked-up drawings, a PDF summary, and Excel quantities by division.
Florida MEP Estimating Guides
Get Your Florida Estimate
Submit your plans and receive a detailed, line-item estimate, with most standard requests in 24-48 hours, confirmed with your quote.