Estimating and Design Services in Chicago
A Chicago estimate has to be built on the Chicago codes, not on the model codes with a city multiplier applied. Title 14B rewrote the building code, Title 18 governs plumbing, and Title 14E governs electrical, and each carries amendments that change design and inspection. On top of that sits a union-dominated labor market with published rates, a winter design condition that drives freeze protection, and a stormwater ordinance that adds detention scope to many sites. Typical fee is $300 to $2,500 by trade count and project size. Estimates are billed at $30-$45 per hour.
Chicago does not adopt the model code, it rewrites it. The Chicago Construction Codes change how pipe, duct and electrical work is designed, and union trade rates change what it costs to install.

What Chicago Does Differently
Chicago is the one major market where quoting a national unit cost book will get a bid rejected. The city writes its own code: duct construction, sprinkler coverage, plumbing materials and electrical installation all carry Chicago-specific requirements that a team working from the International Codes will miss. Labor is the second difference. Most large commercial work runs on union trades with published wage and benefit rates, so labor is a number you can look up rather than a number you estimate, and that changes both the bid and the risk profile. Winter is the third. Chicago design conditions drive heating-dominant systems, freeze protection on wet systems, and a construction season that shapes the schedule.
Statewide code and climate detail sits on the Illinois page.
The Four Things That Move a Chicago Bid
Chicago writes its own code
Title 14B replaced the model building code with a Chicago edition, Title 18 governs plumbing and Title 14E governs electrical. Duct construction, sprinkler density, pipe material and wiring methods all differ from the I-Codes, and the plan reviewer checks the Chicago version.
Union labor with published rates
Most large commercial work runs union, and the wage and benefit rates are published and scheduled rather than negotiated per project. That makes labor more predictable, but it also means a non-union assumption produces a bid that cannot be built.
Freeze protection and heating design
Winter design conditions drive heating capacity, insulation on wet systems, glycol where lines run through unconditioned space, and freeze protection on fire protection. On a renovation, an unheated space is a real scope decision, not a detail.
Stormwater detention
The city stormwater ordinance requires onsite detention and rate control on many projects, and it interacts with site layout. It is civil scope, but it moves equipment, vaults and the electrical room, which is why it belongs in the estimate.
Where the Work Is, and What It Looks Like
Chicago proper, the inner suburbs and the collar counties are three different approval environments. The project type changes sharply between them.
| Submarket | What gets built there | What drives the estimate |
|---|---|---|
| The Loop and West Loop | Office towers, conversion to residential, hotel, transit-adjacent | High-rise plumbing and risers, fire pump and standpipe scope, and mechanical rooms retrofitted into buildings that were not designed for them |
| Fulton Market and River North | Office, restaurant, hotel, adaptive reuse of industrial stock | Kitchen exhaust and make-up air, grease interceptor sizing, and heavy structural work inside existing timber and masonry buildings |
| Streeterville and the Near North | High-rise residential, hospital, hospitality | Central plants, pressure-zoned plumbing, and work in occupied buildings with strict noise and access limits |
| South and West Sides | Institutional, education, healthcare, large residential | Public funding with prevailing wage and MBE/WBE participation, plus older building stock that needs system replacement |
| O'Hare and the industrial corridors | Distribution, manufacturing, data and logistics | High-bay heating, ESFR sprinkler, heavy power, and ComEd service coordination that sets the energization date |
| Inner suburbs and collar counties | Office campus, retail, multifamily, light industrial | Each suburb adopts its own code edition, usually the model code rather than Chicago's, so the same drawings price differently across a county line |
Chicago and its suburbs are on different code families. Evanston, Oak Park and Schaumburg do not review to Title 14B, which changes the design basis and the cost.
What a Chicago Estimate Costs
Fees follow construction value and trade count. Union labor and the Chicago amendments change construction cost, not the estimating fee.
| Project construction value | Our estimating fee | What pushes it toward the top of the range |
|---|---|---|
| Under $500K | $300 to $1,200 | Restaurant or retail fit-out where grease, exhaust and make-up air have to be sized to the Chicago code on a tight existing lot |
| $500K to $2M | $1,000 to $2,500 | Four trades, a real spec book, and a building where the mechanical room and riser space are the constraint |
| $2M to $10M | $2,000 to $5,000 | High-rise plumbing, fire pump and standpipe scope, or a conversion where the existing structure drives the mechanical layout |
| $10M and up | $4,000 to $12,000+ | Tower work, central plants, quoted chillers and switchgear, and phased work in occupied buildings |
Fee ranges, not construction cost. Chicago union rates and the Chicago code amendments together put the city above the collar counties for the same drawings.
What We Estimate and Design in Chicago
Chicago Estimating and Design Questions
Why is Chicago code different from the model code?
Chicago maintains its own construction codes rather than adopting the International Codes wholesale. Title 14B covers building, Title 18 covers plumbing and Title 14E covers electrical, each with Chicago amendments. Duct construction, sprinkler requirements, pipe materials and wiring methods all differ, so the design basis has to be the Chicago edition.
Do you price union labor in Chicago?
Yes, on projects where the trades are union, which is most large commercial work in the city. Rates and scheduled increases are published, so labor is priced from current rates rather than a national average. A bid built on open-shop assumptions does not survive contact with a Chicago subcontractor.
How does winter affect a Chicago estimate?
Heating dominates the mechanical design, wet systems need freeze protection where they run through unconditioned space, and fire protection needs dry or pre-action systems in those areas. Temporary heat is also a real cost during construction, which is easy to leave out of a budget built in a warmer market.
How fast can you turn a Chicago estimate around?
Most complete drawing sets come back in 24 to 48 hours. Conversions with incomplete existing drawings, and work that needs quoted equipment, take longer, and we tell you which category the job falls into before we begin.
Illinois MEP Estimating Guides
Get Your Chicago Estimate
Submit your plans and receive a detailed, line-item estimate priced to the Chicago permit requirements.