Estimating and Design Services in Los Angeles
An LA estimate starts with three questions the drawings often do not answer: which edition of Title 24 the permit will be checked against, whether the building is in a seismic retrofit category, and whether the all-electric ordinance applies. Add LADBS plan check timelines, a fire hazard severity zone on anything near the hills, and SCAQMD rules on engines and coatings, and the compliance layer becomes a real line item. Typical fee is $300 to $2,500 by trade count and project size. Estimates are billed at $30-$45 per hour.
Los Angeles prices compliance before it prices systems. Title 24, CALGreen, the city all-electric ordinance and a seismic retrofit obligation can each change the scope before a single fixture is counted.

What Los Angeles Does Differently
Los Angeles is the most compliance-dense construction market in the country, and the cost of getting it wrong shows up as a plan check correction cycle rather than a line item. LADBS reviews against the California codes plus the city's own amendments, and the city has moved faster than the state on electrification. The building stock splits the work too: Downtown has an adaptive reuse ordinance that turns 1920s office towers into housing, the Valley carries industrial and multifamily, and the hillside and Very High Fire Hazard Severity Zones add access, water supply and material requirements that inland projects never see. Seismic is the constant. Soft-story, non-ductile concrete and unreinforced masonry buildings carry retrofit obligations that are often the largest single scope item on a renovation.
Statewide code and climate detail sits on the California page.
The Four Things That Move a Los Angeles Bid
Title 24 and CALGreen
California runs the strictest energy code in the country, and the compliance path is documented rather than assumed. Lighting power density, envelope, ventilation and commissioning all have to be priced against the edition the permit is reviewed under.
City all-electric ordinance
Los Angeles requires all-electric new construction for most building types, with exceptions that are narrower than they look. Gas infrastructure, venting and service sizing change when a project goes electric, and that is a cost decision at concept stage.
Seismic retrofit categories
Soft-story wood frame, non-ductile concrete and unreinforced masonry buildings each carry a retrofit obligation with its own scope. On an older building this is frequently the biggest number in the estimate, and it is not optional.
Fire hazard and hillside access
In the Very High Fire Hazard Severity Zones, water supply, access width, roofing assemblies and exterior materials are prescribed. Hillside sites add foundation and shoring scope that a flat-lot budget will not cover.
Where the Work Is, and What It Looks Like
Los Angeles is a city of separate construction markets stacked on top of one code. The address decides the compliance path as much as the drawings do.
| Submarket | What gets built there | What drives the estimate |
|---|---|---|
| Downtown and the Historic Core | Adaptive reuse of pre-1940s office towers, residential conversion, hotel | Existing structural systems, seismic upgrade, and the fact that new mechanical and plumbing are being threaded through a building that was never designed for them |
| Hollywood and Mid-Wilshire | Multifamily, hotel, office, entertainment | Soft-story retrofit exposure, Title 24 envelope compliance and dense-site logistics |
| Century City and West LA | High-rise office, medical office, hospitality | Central plants, high-rise plumbing, and plan check coordination on a building that has to stay occupied |
| San Fernando Valley | Industrial, warehouse, multifamily, retail | Large roof areas, evaporative and packaged cooling, and separate plan check queues through the Van Nuys office |
| South Bay and the ports | Logistics, manufacturing, aerospace support | Heavy power services, process cooling, SCAQMD engine and coating rules, and port-adjacent scheduling |
| Santa Monica, Pasadena, Burbank | Office, multifamily, institutional | Their own reach codes and review standards, which often go further than the city of Los Angeles |
Los Angeles city, Santa Monica, Pasadena and Burbank each review separately and each has its own reach code. The permit city is confirmed before pricing.
What an LA Estimate Costs
Fees follow construction value and trade count. Compliance research adds work to the estimate, not to the fee table.
| Project construction value | Our estimating fee | What pushes it toward the top of the range |
|---|---|---|
| Under $500K | $300 to $1,200 | A tenant improvement where the base building's Title 24 documentation has to be reconstructed before anything can be priced |
| $500K to $2M | $1,000 to $2,500 | Four trades, an all-electric design basis, and a seismic or accessibility scope that runs alongside the MEP work |
| $2M to $10M | $2,000 to $5,000 | Adaptive reuse with structural unknowns, hillside or fire zone requirements, or a campus across two jurisdictions |
| $10M and up | $4,000 to $12,000+ | High-rise work, central plants, quoted equipment with real lead times, and phased occupancy in a building that stays open |
Fee ranges, not construction cost. Los Angeles construction pricing carries a compliance and labor premium that other California markets do not.
What We Estimate and Design in Los Angeles
Los Angeles Estimating and Design Questions
Does the Los Angeles all-electric ordinance affect every project?
It applies to most new construction, with exceptions that are narrower than most teams assume. The practical effect is that gas service, venting, and the electrical service size are decided early. On a renovation the trigger depends on scope, so the applicability question is answered before the design basis is set.
How do you price a seismic retrofit alongside MEP scope?
As two scopes in one estimate. The retrofit is driven by the building type and the ordinance that covers it, and the MEP work is often sequenced around it. On older buildings we flag the retrofit exposure early, because it can outweigh the mechanical and electrical work it is wrapped around.
Which Title 24 edition applies in Los Angeles?
The edition in force at permit submittal, checked against the California Energy Commission's effective dates, plus the city's own amendments. Burbank, Pasadena and Santa Monica have their own reach codes on top, so a project in one of those cities is priced to that city, not to the county.
How fast can you turn an LA estimate around?
Most complete sets come back in 24 to 48 hours. Plan check corrections, adaptive reuse with incomplete existing drawings, and work that needs quoted equipment take longer, and we say which category the job falls into before we start.
California MEP Estimating Guides
Get Your Los Angeles Estimate
Submit your plans and receive a detailed, line-item estimate priced to the Los Angeles permit requirements.